Mc-leod 1967-69 Camaro Hydraulic Conversion Instructions User Manual download pdf

1967 – 69 Chevrolet Camaro Hydraulic Clutch Conversion Kit

1) Remove all of the existing factory mechanical clutch linkage components. (Clutch rod, bell crank or

Z bar) from under the dash and at the bell housing area.

Figure 1 Figure 2

2) Remove the brake master cylinder and booster assembly (if equipped). Carefully remove the

brake lines from the master cylinder and mark them to be certain they are reinstalled into the

correct ports. Brake lines may need to be rerouted if interference occurs. Only use proper steel

brake lines when rerouting the brake lines.

3) Assemble the McLeod master cylinder to the mounting plate with supplied screws and lock

washers. Tighten screws securely. Install the mounting plate/McLeod master cylinder assembly,

passing the pushrod through the firewall. Re-install the factory brake master cylinder onto the

mounting bracket. Install washers and nuts. Tighten all four fasteners securely.

4) Install the pedal bracket, with the stud at the top, to the pedal under the dash with supplied 5/16”

bolt and nut. Place the rod end on the end of the push rod over the stud with the lock washer and

nut. Remove the heavy pedal return spring from the pedal if present. Swing the pedal through its

range of motion to be certain there is no interference with any component including wires and or

hoses. See Figure 3 & 4.

5) Mount the master cylinder reservoir in a convenient location above the master cylinder using the

supplied screws. Connect the reservoir to the master cylinder with the red hose. Secure the

reservoir and hose with supplied clamps (3). See Figure 2

1 2

Page 1

1967 – 69 Chevrolet Camaro Hydraulic Clutch Conversion Kit 1) Remove all of the existing factory mechanical clutch linkage components. (Clutch rod,

Page 2

Figure 3 Figure 4 6) Connect the McLeod master cylinder to the slave cylinder with the supplied AN4 line.

No comments

Mc-leod 1967-69 Camaro Hydraulic Conversion Instructions User Manual